How to record ServiceTitan customer financing payouts in QuickBooks? 4 steps
By the ReconoSync team · Published · Updated
Record the lender ACH as one QuickBooks Bank Deposit that equals the net payout, after ServiceTitan has already marked the invoices paid at the financed amount. Put the dealer fee on that same deposit as a negative line. Keep those payments out of the card batch.
This is the click path for a bookkeeper who closes several ServiceTitan shops in QuickBooks Online. A customer financing payout is the lump the lender sends after a homeowner finances a job through GreenSky, Synchrony, Wisetack, Service Finance, or another partner. A dealer fee is the amount the lender kept before it funded checking. Card-processor deposits are a different job: how to reconcile ServiceTitan deposits in QuickBooks Online.
What you are matching
The bank shows one number. ServiceTitan and the lender show several.
| List | Where | What it shows |
|---|---|---|
| Financed invoices | ServiceTitan invoice, paid with the GreenSky or other financing payment type | Gross amount financed, already marked paid |
| Lender funding report | GreenSky merchant portal, Synchrony, Wisetack, or Service Finance funding report | Jobs in this ACH, dealer fee, clawbacks, deposit date |
| Clearing or Undeposited Funds | Chart of accounts, the account that financing payment type exports to | Gross payments waiting on the lender |
| Bank feed | Bank transactions, checking | One ACH, often several jobs, net of the fee |
ServiceTitan’s offer-financing guide, read 2026-10-14, says the financing partner sends payment to your account per their terms. Track it in Accounting, Customer Payments. The bank line is that payment, not the invoice total.
On r/HVAC in February 2024, one shop called Synchrony plans at 12%+ outrageous, and another said they do not pay more than about 4% for the worst loan they offer. Treat those as unverified. The fee on this payout is the number on the funding report.
Keep financing out of the card batch
ServiceTitan’s financing-fees workflow, updated 2026-08-31, is blunt. If you reconcile the bank by batch, do not batch and export the Finance Fee and financing-company payment types with other payments. They will make your batches not match your bank. Those two types can be batched with each other. They cannot share a batch with cards, cash, or checks.
Do this once per lender, in Settings, Invoicing, Payment and Invoice Types.
- Create a payment type named after the lender, for example GreenSky Financing. ServiceTitan’s recommended setup exports it as a Journal Entry, with the financing attribute, mapped to a clearing account (other current liability).
- Create a payment type named Finance Fee. Export as Journal Entry, mapped to a financing-fee expense. ServiceTitan’s journal-entry help, read 2026-10-14, names Financing Fees as a common type. Unchecked, the payment goes to Undeposited Funds.
- One payment type per lender. GreenSky, Synchrony, and Wisetack fund on different cycles. One generic Financing type hides which ACH is off.
- Map GreenSky Financing to the QuickBooks account you actually use. ServiceTitan will not rewrite payments already exported.
ServiceTitan’s payment-type example, read 2026-10-14, is a $1,000 job, $900 financed, $100 finance fee. The $900 uses the financing payment type. The $100 uses Financing Fee, exported as a journal to the expense. That journal debits the expense and credits Accounts Receivable.
Export the financed jobs at gross
Keep the invoice paid in full. The customer did not underpay. The lender did.
On the recommended workflow, collect the full financed amount on the original invoice with the financing-company payment type, then add an adjustment invoice billed to the financing company so the fee never prints on the customer’s copy. Export that. You can export before the lender funds.
On QuickBooks Online, that export creates credits you apply by hand. Open the original customer invoice, add payment, check the journal entry under Credits, and save. Repeat on the financing-company invoice. Skip this and AR stays open.
If the shop never built that path and the financing type still exports as a Payment, those lines land in Undeposited Funds at gross. Leave them there until the ACH hits. Do not cut the invoice to the net.
Record the net payout when the ACH hits
Open the lender funding report first. It names the jobs in this lump, the fee, and any clawback. The bank description is usually just the lender’s name and an amount.
If the payments sit in Undeposited Funds, build a Bank Deposit. Intuit’s deposit help, updated 2026-08-03, is this path.
- Select + Create, then Bank Deposit.
- Choose the checking account the lender pays. Set the date to the bank-statement date.
- Check only the financed payments in this funding report.
- Scroll to Add funds to this deposit. Set Account to the financing-fee expense, not Bank Charges. Enter the dealer fee as a negative amount. Intuit’s example is a $0.50 fee entered as –.50. ServiceTitan’s example is a $100 fee entered as -100.
- Confirm the deposit total equals the ACH to the cent. Save.
If the payments exported as journals to the financing clearing account, they never appear on the Bank Deposit screen. Credit clearing for the gross already posted. Debit checking for the net ACH. Debit the financing-fee expense for the dealer fee. A Bank Deposit that credits clearing, or a transfer plus an expense from clearing, does that job. The leftover for this payout should be zero. The Bank-type version of that split is how to use a clearing account for batch deposits. Financing’s recommended clearing is a liability, not a bank feed.
On ServiceTitan’s recommended path, also collect two payments on the financing-company customer: the amount received, then the remaining amount as Finance Fee. Export those. Then Match in QuickBooks.
A clawback in this settlement belongs on this deposit as its own negative line, tied to the job the lender reversed. Do not void the original ServiceTitan payment to force the total. Confirm the funding report first, then exclude or void with a memo.
Match the bank feed
Go to All apps, Accounting, Bank transactions. Open checking. Find the lender ACH.
If QuickBooks offers Match to the deposit or transfer you just saved, take Match. Intuit’s categorize help, updated 2026-08-24, treats Categorize or Post as a new ledger entry. Categorize on a GreenSky ACH records the cash twice and leaves clearing or Undeposited Funds stuck at gross.
Turn auto-add off on any bank rule that posts GreenSky, Synchrony, or Wisetack deposits to income.
GreenSky Direct Funding, read 2026-10-14, deposits funds in 24 to 48 hours after the customer authorizes the charge. Virtual-card GreenSky is the other path: the account number is charged like a card through your processor, so the cash lands in the Adyen or TSYS batch. That grouping is the ServiceTitan deposit page, not this one.
When the four lists still disagree
| Symptom | Likely cause | What to do |
|---|---|---|
| QuickBooks total is higher than the ACH by about the fee | Gross payments, net payout | Negative fee line, or the Finance Fee journal |
| Batch never equals any bank line | Financing batched with cards, cash, or checks | Split the next batch. Rebuild this deposit from the funding report |
| Bank line has no matching deposit | Payments still on Error, or exported as a journal | Pending Export Report, or match the feed to that journal |
| ACH is smaller than the jobs you checked | Clawback or holdback in this funding report | Put the reversal on this deposit |
| Clearing or Undeposited Funds keeps growing | Jobs marked paid that the lender never funded | Funding report. Chase incomplete paperwork. Do not journal the leftover to income |
| AR still open after a paid financed job | QBO credits never applied | Apply the journal credits on both invoices |
| Two QuickBooks deposits for one ACH | Virtual-card batch plus a financing deposit | Keep the processor path. Do not also build this deposit |
The native ServiceTitan sync wins the posting job. It is included with the field-service app and creates the invoices and financing payments so you are not retyping them. A clearing account, reconciled by a careful bookkeeper who Matches the feed, does tie out. Someone still has to group the jobs the lender grouped, and book the dealer fee.
If a payment was recorded twice, once in ServiceTitan and once by hand, confirm it against the funding report before you void either copy. Keep the memo. Prefer exclude or void with a memo over a bulk delete.
What never goes on this deposit
| Thing | On the financing deposit? |
|---|---|
| Dealer fee taken from this payout | Yes, as a negative line or the Finance Fee journal |
| Card, cash, or check payments | No. Their own batch |
| Processor fee from Adyen or TSYS | No. That fee sits on the card deposit |
| Virtual-card GreenSky that ran through the processor | No. That is a card settlement |
| Bank feed line | Match it to the deposit you built |
| Typed deposit for the ACH total | No. That is a second copy of the same cash |
You know the week is closed when last week’s lender ACHs are matched, deposit totals equal the statement to the cent with the dealer fee on the same deposit, and the financing-fee expense agrees with the funding report instead of running at twice that amount.
Pull last week’s lender funding or settlement report, the bank statement, and the financing clearing or Undeposited Funds detail in QuickBooks. Start with those three files. They already exist.
Frequently asked questions
Should I batch GreenSky payments with card deposits in ServiceTitan?
No. ServiceTitan's financing-fees workflow, updated 2026-08-31, says not to batch and export Finance Fee and financing-company payment types with other payments if you reconcile by batch. They can sit together. Mixed with cards, the batch never equals any bank line.
Why is the lender ACH smaller than the invoices it paid?
The invoices stay at the financed amount. The lender deposits that batch net of a dealer fee. ServiceTitan's payment-type help uses a $1,000 job with $900 financed and a $100 finance fee. The fee is the shop's cost. It is not a customer underpayment.
Should I Categorize the GreenSky or Synchrony ACH as sales income?
No. That records the cash a second time. The invoices are already paid in ServiceTitan and exported. Build one deposit or transfer that equals the net ACH, then Match. Intuit's categorize help, updated 2026-08-24, treats Categorize or Post as a new ledger entry.
What if GreenSky paid us with a virtual card instead of an ACH?
Then the cash is a card settlement, not a financing payout. ServiceTitan's GreenSky mobile FAQ, read 2026-10-14, says the account number is used like a credit card with your processor. Group it with that processor's batch. Direct Funding is the ACH path, funded in 24 to 48 hours.
After the financing export, do I have to apply credits in QuickBooks Online?
Yes, on the recommended journal-entry path. ServiceTitan's financing-fees workflow, updated 2026-08-31, says QBO shops must apply the exported credits on the original customer invoice and on the financing-company invoice. Skip that and AR stays open even though the job looks paid in ServiceTitan.