How to use a clearing account for batch deposits in QuickBooks Online?
By the ReconoSync team · Published · Updated
A clearing account is a temporary bank-type account that holds customer payments at the amount collected until the processor deposits that batch, often net of fees. Post the payments in at gross, the payout out at net, the fee as an expense, and bring the clearing balance back to zero.
This is the click path for a bookkeeper who closes several ServiceTitan, Housecall Pro, or Jobber shops in QuickBooks Online. A field service management system, or FSM, is the shop’s job, invoice, and payment app. A batch is the group of payments meant to equal one bank deposit. The processor payout is that lump hitting checking.
What the four lists show
The bank shows one number. The clearing account and the processor show several.
| List | Where | What it shows |
|---|---|---|
| Customer payments | Receive Payment, or the FSM sync into the clearing account | Gross amount each customer paid |
| Processor payout or settlement | Stripe, Adyen, TSYS, or FSM payout report | Net deposit, fees, refunds, holds, deposit date |
| Clearing account | Chart of accounts, a Bank-type account named for that processor | Gross in, fees and payouts out |
| Bank feed | Bank transactions, checking | One lump the processor sent, often days later |
Intuit’s clearing-account help, updated 2026-08-05, is an account you use to move money when you cannot move it in one step. It normally balances to $0.00 because you take out what you put in. Bank type is the one that accepts Receive Payment in and a transfer or check out.
Undeposited Funds is the built-in clearing account for payments waiting on a Bank Deposit. If the FSM still posts there, group them on why undeposited funds don’t match bank deposits. This page is the named Bank-type pass-through, one per processor.
Set it up in QuickBooks Online
Do this once per processor. Do not connect this account to a real bank feed. Do not enter an opening balance.
- Go to All apps, then Accounting, then Chart of accounts.
- Select New account. Set Account type to Bank.
- Name it after the processor, such as Adyen Clearing or Stripe Clearing.
- Leave the opening balance blank. Select Save.
- If a fee expense is missing, New account, type Expenses, detail type Bank charges, name it Processing fees.
One clearing account per processor. Mixing two processors in one account hides which payout is off.
A commenter on r/QuickBooks in May 2025 used the same Stripe sequence: Bank-type clearing, gross in, fees as an expense from that account, the payout as a transfer to checking, then zero or the Stripe ending balance.
Post the payments in at gross
Keep the invoice paid in full. The customer did not underpay. The processor did.
- Open + Create, then Receive payment, unless the FSM already synced the payment.
- Apply it at the amount collected. Set Deposit to to that processor’s clearing account. Save.
Skip Receive Payment for lines the FSM already posted. If the sync still maps Deposit to to Undeposited Funds, point it at this clearing account, or stay on Undeposited Funds and group with Bank Deposit. Do not post the same cash to both.
ServiceTitan’s default export is Undeposited Funds. That grouping is how to reconcile ServiceTitan deposits in QuickBooks Online. Why the lists disagree is why ServiceTitan batch deposits don’t match the bank. Use this clearing path when you book from the settlement report, or when payments already land in a Bank-type account named for the processor.
Do not cut the invoice or record the payment at net. That leaves AR open or understates sales.
Move the payout out at net
Open the payout or settlement report first. The fee and the net come from that report.
ServiceTitan’s Adyen autobatching help, read 2026-10-08, states the deposit Total is net, gross minus fees. Their example is a $5,000 gross deposit with $125 in fees, Total $4,875. Stripe’s payout reconciliation report, read 2026-10-08, lists every payment, refund, dispute, and fee inside a payout; the payout amount is the net.
| Line | What you post | That example |
|---|---|---|
| Payments already in clearing | Gross, already sitting there | $5,000 in |
| Fee expense | Expense paid from the clearing account | $125 out |
| Transfer to checking | Net that hit the bank | $4,875 out |
| Clearing leftover for this batch | Should be zero | $0 |
- Select + Create, then Expense. Payee is the processor. Payment account is the clearing account. Date is the bank-statement date.
- Category is the processing-fee expense. Amount is the fee on the settlement. Memo is the payout ID. Save.
- Select + Create, then Transfer. From the clearing account, to the checking account the processor pays, for the net bank line. Same date, same payout ID. Save.
- Open the clearing register. That batch should now net to zero.
A single journal does the same job: debit checking for the net, debit the fee expense, credit clearing for the gross. A2X’s Payability article, dated 2023-10-26, uses a Bank-type clearing as a pass-through, then an expense for remaining fees so the register shows $0.
Refunds and holds in the same settlement reduce the net. Put them on this payout. If the wrong payments landed in clearing, move them. Do not void the original FSM payments to force the total. The Undeposited Funds version of the fee, as a negative line on Bank Deposit, is how to record credit card fees taken out of deposits in QuickBooks Online.
Match the bank feed
Go to All apps, Accounting, Bank transactions. Open checking. Find the processor lump.
If QuickBooks offers Match to the transfer you just saved, take Match. Intuit’s categorize help, updated 2026-08-24, treats Categorize or Post as a new ledger entry. Categorize on a processor payout records the cash twice and leaves clearing stuck at gross.
Turn auto-add off on any bank rule that posts Square, Stripe, Adyen, Jobber, or Housecall Pro deposits to income.
When the clearing account will not zero
Reconcile clearing against the processor dashboard, not against a guess of zero. Synder’s clearing-account article, dated 2024-03-07, says that if sales and payouts are both in the books, the clearing balance equals the Stripe (or other gateway) balance. A leftover that matches the dashboard is money still at the processor. A leftover that does not is an error.
A bookkeeper on r/Bookkeeping in April 2026 described a small leftover from orders that settled the next day, and treated it as timing when it matched the gateway. Do not journal leftover to income to make the account look clean.
| Symptom | Likely cause | What to do |
|---|---|---|
| Leftover equals the processor dashboard | Settlement lag, holds, weekend batches | Leave it. Reconcile to that balance |
| Leftover is about the fee | Fee never booked | Expense from clearing, then Match |
| Clearing is high and income is high | Bank line was Categorized | Undo, then Match to the transfer |
| Clearing is low after the bank has the cash | Payout transferred twice, or the FSM already moved it | Undo the extra transfer |
| One payment short, or one too many | Payment in the wrong processor’s clearing | Move it |
| Refund in the settlement, missing in clearing | Refund never posted, or posted to checking | Put it on this payout |
When the split is already posted
Some paths already move gross to net and put the fee on the deposit. Another transfer out of a clearing account then double-counts the cash.
| Path | What already landed | What you do |
|---|---|---|
| Jobber Payments payout sync | Deposit to checking, fees on Jobber Payments Fees | Match. Jobber also uses Instant Payout Clearing and Refunds Clearing. |
| Housecall Pro card, tip, Instapay, mobile check | Grouped deposit, fees on Housecall Pro Payment Processing Fees | Match. Housecall Pro, dated 2026-01-21, auto-moves cards in 2 to 5 business days. Cash and check still need a Bank Deposit you build. |
| A2X or Synder on Shopify or Stripe | Journal or transfer that already splits sales, fees, and the payout | Match their deposit. A second fee expense overstates cost. |
| QuickBooks Payments | Batch deposit plus a separate fee withdrawal | Match both bank lines. |
| ServiceTitan export, Square, Stripe, or no payout sync | Gross in clearing or Undeposited Funds, net at the bank | Transfer the net, expense the fee, as above. |
If a payment was recorded twice, confirm it against the payout report before you void either copy. Keep the memo. Prefer exclude or void with a memo over a bulk delete. Duplicate Jobber payments are how to fix duplicate payments from the Jobber QuickBooks sync. A second Housecall Pro invoice is why Housecall Pro creates duplicate invoices.
The native FSM sync wins the posting job. It is included with ServiceTitan, Housecall Pro, or Jobber on the plans that offer it, and it creates the invoices and payments so you are not retyping them. Jobber payout sync and Housecall Pro’s card grouping already put the fee on the deposit. A2X and Synder post Shopify and Stripe payouts well for what they cover. A Bank-type clearing account, reconciled by a careful bookkeeper who Matches the feed, does tie out. Someone still has to post the gross, the net, and the fee when nothing has posted that split yet.
Pull last week’s processor payout or settlement report, the bank statement, and the clearing-account register in QuickBooks. Start with those three files. They already exist.
Frequently asked questions
What is a clearing account in QuickBooks Online?
A temporary bank-type account that holds money until you can finish the move. Intuit's setup help, updated 2026-08-05, says it normally balances to $0.00 because you take out what you put in. For a processor batch, payments go in at gross and the net payout plus the fee come out.
Should I use Undeposited Funds or a separate clearing account for processor batches?
Use Undeposited Funds when the field app still posts each payment there and you group them on Bank Deposit. That built-in account is itself a clearing account. Use a named bank-type clearing account when you need one pass-through per processor, or when you book from the payout report. Do not run both on the same cash.
Why won't the clearing account go back to zero?
Either the processor still holds funds, or a line is missing. Match the leftover to the processor dashboard first. If it matches, leave it. If it does not, look for an unbooked fee, a refund, a payment in the wrong batch, or a bank line Categorized as income. Do not journal the leftover to income to force a zero.
Should I Categorize the processor payout in the bank feed?
No. Categorize or Post records a new ledger entry. The payments already sit in the clearing account. Transfer the net to checking, book the fee, then Match the downloaded line to that transfer. Intuit's categorize help, updated 2026-08-24, treats Match as merging the two. A bank rule that auto-adds processor deposits to income does the same overnight.
What if Jobber or Housecall Pro already moved the payout to checking?
Match the bank feed to that deposit. Jobber's payout-sync help, updated 2026-09-24, moves fees to Jobber Payments Fees on the same deposit. Housecall Pro's reconciling-payments help, dated 2026-01-21, does the same for cards. Another transfer out of a clearing account, or another negative fee line, overstates the expense.